Iflight SucceX F4 V2.1 50A

SucceX F4 V2.1 TwinG FC Specifications
-MCU：STM32F405R6T6
-IMU：Twins ICM20689，Twins Gyros built-in（SPI）
-Baro：NO
-Betaflight OSD：YES
-BEC：5V 2.5A
-Blackbox：32MB
-Telemetry：Support (RX6)
-5 x Uarts（1 2 3 4 5）with build-in inversion
-8 x  Dshot/Proshot/Oneshot output
-8 x individual ESC power/ signal pads
-1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
-VTX protocol：IRC Tramp
-WS2812 led Strip：YES
-Beeper：YES
-Input：2-6S（5-36V）
Physical
-Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
-Dimensions：36*36mm
-Weight：6.3g
SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC
Features:
- 8 layers double-sided PCB board;
- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
- 32bit FO51K86 MCU, 48mHz maximum clock speed;
- TDK MLCC Low ESR ceramic capacitors;
- Top grade NTMFS5C430NL MOSFET;
- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection
SucceX 50A 2-6S Specification:
- Dimension: 43*39mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight:14.4g
- Supports 2-6S lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: Yes
-Telemetry：Supported
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Package included:
- 1x SucceX F4 V2.1 TwinG FC
- 1x SucceX 50A 2-6s BLHeli_32 4-in-1 ESC